What do I must to do when wheels enter the shoulder?

If there is a roadside shoulder, pull as far onto it as you can. If there is a curb, pull close to it — you must not park more than one foot away. Always park on the right side of the roadway, unless it is a one-way street. Make sure your vehicle cannot move.

1. When your wheels fall to the shoulder of the road a driver should?
2. When you're right wheels run onto a soft shoulder What is the best way to get back on the highway?
3. Can you stop on hard shoulder?
4. What is the stab braking method?
5. How slow should you drive in rain?
6. How do you make room for cars entering the freeway?
7. When you drive at night you can reduce the problem of glare?

When your wheels fall to the shoulder of the road a driver should?

Explanation If your vehicle's wheels drift off the pavement onto the shoulder, you should grip the wheel firmly, ease your foot off the gas pedal, and brake gently. After checking for traffic behind you, gently steer the vehicle back onto the pavement.

When you're right wheels run onto a soft shoulder What is the best way to get back on the highway?

What is the best way to get back on the highway if your right wheels run onto a soft shoulder? Ease your foot off the gas and brake gently. Try to pump it to build up the pressure. You just studied 8 terms!

Can you stop on hard shoulder?

Hard shoulder top tips

Only stop on the hard shoulder in an emergency. ... Never drive on the hard shoulder unless directed to do so by road signs or a police officer. When you stop on a hard shoulder pull over as far to the left as possible and put your hazard lights on.

What is the stab braking method?

Explanation The stab braking method for emergency stops involves fully applying the brakes until they lock up. The brakes are then released until the wheels start rolling, and then the process is repeated.

How slow should you drive in rain?

Slow down!

The California Department of Motor Vehicles recommends 5 to 10 miles per hours slower than the speed at which you would normally go.

How do you make room for cars entering the freeway?

Make room for cars that are entering the freeway by:

Merging into a different lane. Maintaining your speed and position.

When you drive at night you can reduce the problem of glare?

Explanation : To help avoid the glare of approaching high beams, shift your eyes to the right. Use the road edge as a guide until the approaching vehicle passes by.